Non-shrink cementitious grout is commonly used for filling and grouting of base plates in steel framed buildings, crane rails, machinery beds, balustrades,bridge bearing pads and dowel bars. Most of the time, they can be used from “dry packs” to highly flowable consistencies without having to compromise the strength and it non-shrink properties. They only require the on-site addition of water to produce a non-shrink grout of predictable performance.
Furthermore, higher performance non-shrink grouts are available for situations demanding resistance to dynamic loading, vibration and corrosion due to harsh environments and chemical attack. Experts say that they are ideally suited for machinery anchoring and bedding in the automotive and canning industries. Moreover, there are also waterproofing grout (a mixture of cement concrete with waterproofing solutions) A free-flowing, expanding grout. This fills the gap between pipe inserts into concrete/masonry walls and floors. It is non-shrinking and fast setting material which provides long-lasting water tight seal.
Non-shrink Cementitious Grouts Features:
● Good dimensional stability
● Versatile
● Economical, low in-place cost
● Ready to use, pre-mixed, requires only the addition of water
● Non-staining – chloride and iron free
● Lower water/cement ratio
● educed drying shrinkage
● Increased hardness and durability
● Reduces Permeability
● Proven and predictable performance
PREPARATION:
Corrotech experts say that the surface onto which the grout is to b applied must be scabbled to remove laitance and expose the aggregate. It is also important to remember not to use hammers or similar preparation tools that can crush the aggregate but leave it in place. Also, the surface should be free from oil, dust, paint, curing compounds or any other dirt.
STORAGE:
Make sure to store out of direct sunlight, clear of the ground on pallets protected from rainfall and ensure to avoid excessive compaction. Failure to comply with the recommended storage conditions may result in premature deterioration of the product of packaging.
PRECAUTION:
The temperature of both the grout and the elements coming into contact with the grout must be in the range of +10°C to +35°C. Keep in mind not to use water in an amount or at a temperature that will produce a consistency more than fluid or cause the mixed grout to bleed or segregate.
CORROTECH
From simple void filling to precision engineering applications, Corrotech has vast non-shrink grouts as well as waterproofing product Dubai to meet every situation. Their product range offers perfect solutions for all high strength, non-shrink grouting, anchoring and fixing applications. For more detailed information, applications and technical data sheets of non-shrink grouts, visit their website at https://www.mctuae.com/